Member Login

E-mail:    Password:  




 TitleDate AddedCompany
whitepaper Pratt & Whitney's Very Visible, Highly Successful Engineering Data Transformation2007-11-01 siemens
  Pratt & Whitney (P&W) has built more than half of the 34,000 commercial aircraft engines in service today and more than 40,000 military engines. To meet ambitious cost and cycle time reductions targeted by top management, Pratt & Whitney's engineering organization needed to revitalize its handling of product data. Rather than develop the new CM system in house, P&W decided to evaluate commercial product lifecycle management (PLM) software. By that time, the company had standardized on Unigraphics (now called NX) as its product development system and replaced multiple proprietary Configuration Management (CM) methods with single system built on Teamcenter software; establish NX software models as sole product description.

Tags: CAD, Collaboration Tools		   
whitepaper Bode GmbH & Co. KG Improves Performance and Customer Satisfaction With Visualization Solution2007-11-01 Oracle
  Bode, a subsidiary of the Munich-based company Schaltbau Holding AG, was founded in 1968 in the city of Kassel, Germany. As a system supplier for major bus and railway train manufacturers, Bode GmbH & Co. KG serves as a data hub between clients and subcontractors. To facilitate this process, Bode implemented Oracle's AutoVue3D Professional Advanced (previously known as AutoVue SolidModel) to visualize CAD data from third-party applications without prior conversion and conduct visual checks of converted data before they are transmitted. The company has since expanded use of its AutoVue system to other operational areas, such as the technical documentation department.

Tags: 3D Modeling and Rendering, CAD		   
whitepaper Establishing Regulatory Compliance in the Medical Device Industry2007-10-01 siemens
  The public health community and its providers are continually improving their ability to deliver new procedures, treatments, diagnostic methods and preventive practices. Breakthrough advances by medical device companies have facilitated both earlier disease detection and better long term healthcare. However, productivity within the medical device industry has been inhibited by the complexity of today's health and safety regulations - and the cost and time required to comply with their associated regulatory approval processes. New initiatives must be made available to help medical device companies focus more of their resources on new product development and less on regulatory compliance.   
whitepaper Concept-to-Customer" Approach Helps ANCA Level the International Playing Field2007-10-01 siemens
  ANCA was founded in 1974 to design and manufacture high technology computer numerical control (CNC) machines for the machine tool and metal-based industries. ANCA PTY, Ltd. wanted to effectively compete with Western manufacturers of CNC machines and decrease production engineering time to maintain and expand markets. The company implemented a "Concept-to-customers" product development approach and used solid models to visualize complex assemblies. They used collaboration tools that allow for the integration and synchronization of all product data and process knowledge across a global product development environment.

Tags: CAD, Collaboration Tools		   
whitepaper Pagnotta Engineering Relies on the Abilities of Femap and NX Nastran to Quickly Tackle the Wide Range of Analysis Projects Its Customers Require2007-10-01 siemens
  Pagnotta Engineering, Inc. provides a complete range of mechanical design and analysis services to customers in industries including aerospace, aircraft simulation, transportation, medical, and consumer products. Pagnotta Engineering wanted to address customer demands for immediate analysis support and ensure accuracy in analysis results. The company used Femap to import, or rapidly create, customers' geometry and relied on NX Nastran for reliable results, marketplace acceptance and best-in-class support. They also displayed results with Femap to make information meaningful.

Tags: CAD, Collaboration Tools		   
whitepaper Leading the Way in the Development of a Cost-Effective, High-Performance Jet2007-10-01 siemens
  Aviation Technology Group wanted to create a civilian aircraft that performs like a military fighter. Keep the cost of the plane as low as possible and obtain FAA certification. One of the main challenges facing ATG has been coordinating development efforts with its global supplier base. ATG chose the Teamcenter digital lifecycle management solution from Siemens PLM (Product Lifecycle Management) Software as its PLM system. Teamcenter software provides ATG with a single source of product and process knowledge that allows in-house designers, analysts, managers and the procurement team as well as external suppliers and the FAA to access the design and related product information.

Tags: Groupware - Workflow, Collaboration Tools		   
whitepaper How Digital Manufacturing Helps Achieve Quality, Time and Cost Targets in High Tech and Electronics Manufacturing2007-10-01 siemens
  Ascom Electronic Industrial Services (EIS) wanted to employ an integrated system that speeds up conversion of design data into manufacturing data. Identify and correct quality problems to build a comprehensive knowledge base to continuously improve the manufacturing process. Ascom Electronic Industrial Services (EIS), a part of Ascom Security Solutions Division of Ascom, uses the NPI and MES components of the Tecnomatix digital manufacturing solution to speed up the conversion of design data into manufacturing data, identify and correct quality problems and build a comprehensive knowledge base that is exploited to continuously improve the manufacturing process and provide transparent quality information both in-house and to customers.

Tags: CAD, Collaboration Tools		   
whitepaper Automation Is a Great Reason for a New CAD System2007-10-01 siemens
  Modellteknik AB makes models, prototypes and mold tools. The company has been in existence for more than 40 years, and is one of Sweden's leading makers of models and prototypes for the Swedish manufacturing industry. Modellteknik needed to upgrade its design environment to improve tool design efficiency and boost the quality of its models, prototypes and mold tools. The company migrates to Siemens design software with more automated processes and built-in intelligence which Provide customized training for users.

Tags: CAD, Collaboration Tools		   
whitepaper NX and Teamcenter Secure Lead in Crank Drive Design for Motor Sports and Aviation2007-10-01 siemens
  Pankl Racing Systems designs, manufactures and markets high-precision, light-weight construction components for engine and drive systems as well as suspension parts for the motor racing, luxury automobile and aerospace industries. The company's challenge was to extremely short design cycles with top-quality requirements and complex mechanical systems. Pankl deployed Siemens comprehensive knowledge management with successive product replacement; quality planning; collaboration; and loss-free cam integration.

Tags: Groupware - Workflow, Collaboration Tools		   
whitepaper An Innovative Pattern for Manufacturing Success2007-10-01 siemens
  Dependable Pattern Works is one of the largest pattern shops in the Northwest part of the United States. The company's challenge was to remain competitive in the face of fierce global competition. They deployed automate design-through-manufacturing process using NX software with extend NX to shop floor to let machine operators check toolpaths onscreen and rely on long-term relationship with Siemens PLM (Product Lifecycle Management) Software and its reseller partner, Acuity, to maintain leading-edge technology.

Tags: CAD, Collaboration Tools		   


Recognizing technology companies that matter

ZDNet Asia Top Tech Index

Find out who you should be spending your IT budget with